Thursday, February 14, 2008

Wall #2

The second wall is done now. The walls are 5/8 inch CDX plywood. I decided to go with the cheap stuff since I am painting everything inside anyway. This was around $15 per sheet as opposed to the nice stuff which was over $30 per sheet. The walls are 3 sections that are butt jointed together with 1X3s. The framing pieces around the perimeter are 1X2s and custom cut 5/8 ply to match up with the curves. There is a slight size difference where they meet but I feathered it down with a sander pretty easily. In order to make the walls match each other, I stood them up and clamped them together and sanded them with an angle grider. Now they are ready to attach.

No comments:

Post a Comment