The floor still isn't attached. Believe it or not, it took almost the entire afternoon to get these 3 pieces of wood into the frame. I need to use 1/2 inch plywood for the floor to keep the over all height down. But because I am using such thin plywood, there are some places in the frame that need extra support. The piece in the back needed to be put in because I am extending the floor out further than the original floor. These pieces were 2X6s that had to be ripped down and a small notch taken out in order to fit within the frame. They are screwed in on the ends with 2 inch screws. Getting them in took much longer than I thought it would but I am very happy with the results.
No comments:
Post a Comment